| Trade Name | API 5L X70 PSL2 Pipe |
|---|
| Weld Alternatives: | ERW, HF, DSAW/SAWL, SMLS, HSAW |
| OD Size Range: | ERW: 0.375″ through 30″ |
| HF: 0.840″ through 24″ | |
| DSAW/SAWL: 12.75″ through 144″ | |
SMLS: 0.840″ through 26″
HSAW: 8.625″ through 144″ |
| Wall Ranges: | ERW: 0.120″ through 1.000″
HF: 0.120″ through 1.000″
DSAW/SAWL: 0.250″ through 6.000″
SMLS: 0.250″ through 2.500″
HSAW: 0.250″ through 1.000″ |
| Lengths: | Single Random
Double Random
Custom (up to 300′) |
| Grade: | ASTM A53, ASTM A106, ASTM A179, ASTM A192, ST35.8, ST37, ST42, ST52, E235, E355, S235JRH, S275JR, S355JOH, P235TR1, 10#, 20#, 45#, Q235, Q345 |
| Schedule: | SCH5 SCH10 SCH20 SCH30 SCH40 SCH80 SCH120 SCH140 SCH160 SCHXS SCHXXS |
| Surface Finishes: | Bare, Oiled, Mill Varnish, Galv, FBE, FBE Dual, 3LPE, 3LPP, Coal Tar, Concrete Coating and Tape Wrap. |
| End Finishes: | Beveled, Square Cut, Threaded & Coupled. |
| Additional Services: | Internal Coating |
API 5L X70 PSL2 Pipe features:
API 5L X70 PSL2 Pipe – delivery condition and surface
API 5L X70 PSL2 Pipe – straightness
Ends of the API 5L X70 PSL2 Pipe
Marking of API 5L X70 PSL2 Pipe and tube bundles
API 5L X70 PSL2 Pipe – surface protection
| CHEMICAL COMPOSITION | | | | | | | | | | | |
|---|
| Mass fraction, based upon heat and product analysis % maximum | CARBON EQUIVALENT a | | | | | | | | | | |
| % MAXIMUM | | | | | | | | | | | |
| Cb | Si | Mnb | P | S | V | Nb | Ti | Other | CEIIW | CEPcm | |
| SEAMLESS & WELDED PIPES | | | | | | | | | | | |
| L485Q or X70Q | 0.18f | 0.45f | 1.8f | 0.025 | 0.015 | g | g | g | h | 0.43 | 0.25 |
| WELDED PIPE | | | | | | | | | | | |
| L485M OR X70M | 0.12f | 0.45f | 1.7f | 0.025 | 0.015 | g | g | g | h | 0.43f | 0.25 |
| MECHANICAL REQUIREMENTS | | |
|---|
| Y.S | T.S | ELONGATION |
| Mpa(psi) | Mpa(psi) | |
| min | min | min |
| 485(70 300) | 635(92 100) | f |
| IMPACT TEST | |
|---|
| AVG. ABSORBED ENERGY | IND. ABSORBED ENERGY |
| Min.(joules) | Min.(joules) |
| 27 | 20 |
