Descripstion	GRADE	Size
Carbon steel SMLS Pipe	api 5l x52 psl1 pipe
api 5l x52 psl2 pipe	1/2” To 24”	10, 20, 30, STD, 40, 60, XS, 80, 100, 120, 140, 160, XXS
Carbon steel SMLS Pipe	api 5l x52 psl1 pipe
api 5l x52 psl2 pipe	1/2” To 24”	10, 20, 30, STD, 40, 60, XS, 80, 100, 120, 140, 160, XXS
Carbon steel ERW, LSAW, SAW, EFW Pipe	api 5l x52 psl1 pipe
api 5l x52 psl2 pipe	16” To 84”	10, 20, 30, STD, 40, 60, XS, 80, 100, 120, 140, 160, XXS
Carbon steel ERW, LSAW, SAW, EFW Pipe	api 5l x52 psl1 pipe
api 5l x52 psl2 pipe	16” To 84”	10, 20, 30, STD, 40, 60, XS, 80, 100, 120, 140, 160, XXS

API Standard Specification for Line Pipe

API 5L X52 PSL1 Pipe Dimensional Range & Standard Specification

Sr. No.	Material	Size
1	API 5l B Seamless Pipe	15 NB
To
150 NB 200 NB
To
600 NB	Sch. 40s
to
Sch. XXs
& Sch. 20
to
Sch. 160	ASTM A 53 A / B
A-106 Gr. A,B,C
2	API 5l B Welded (ERW) Pipe	15 NB
To
150 NB
&
200 NB
To
750 NB	Sch. 40s
to
Sch. XXs
&
Sch. 20
to
Sch. 160	ASTM A 53 A / B
API 5L
3	API 5l B Low Temperature Carbon Steel	15 NB
To
500 NB	Sch. 40s
to
Sch. XXs	A-333 Gr. 6
Seamless

Note:-
Other Specification
Available	API 5L – A,B, X – 42, 46, 52, 56,
60, 65, 70, 80
Special Tube	Saw Pipes & Steam Pipes
Precision Tubes
Fabricated Pipe (with radiography)
In Form of	Round
Hydraulic Tube &
Horn Tube.
In Length of	Standard
Double &
In Cut length also.
Value Added Service	Draw & Expansion as per required Size & Length
Heat Treatment
Bending
Galvanizing
Annealed
Sand Blasting
Machining Etc.
Test Certificate	Manufacturer Test Certificate
IBR Test Certificate (Form III-D)
Laboratory Test Certificate from Govt. Approved Lab.
Under Third Party Inspection with Excise Gate Pass to avail
Modvat benefit.

Production Standards & Material Qualities

| API 5L L245 / Gr. B (PSL 1) API 5L L290 / X42 (PSL 1) API 5L L245 / Gr. B (PSL 2) API 5L L290 / Gr. B (PSL 2) API 5L L320 / X46 (PSL 1) API 5L L320 / X46 (PSL 2) | API 5L L360 / X52 (PSL 1) API 5L L360 / X52 (PSL 2) API 5L L415 / X60 (PSL 1) API 5L L415 / X60 (PSL 2) API 5L L450 / X65 (PSL 1) API 5L L450 / X65 (PSL 2) | |---|---| | Line Pipe API 5L, PSL 1, PSL 2 CSA Z 245.1 EN ISO 3183 GOST 20295 | Gr A, X70-(N, M) Gr 241-Gr 359 L 245-L485 (N, M, NE, ME) K34-K60 |

API 5L X52 Products

CHEMICAL COMPOSITION
Mass fraction, based upon heat and product analysis % maximum	CARBON EQUIVALENT a
% MAXIMUM
Cb	Si	Mnb	P	S	V	Nb	Ti	Other	CEIIW	CEPcm
SEAMLESS & WELDED PIPES
L485Q or X70Q	0.18f	0.45f	1.8f	0.025	0.015	g	g	g	h	0.43	0.25
WELDED PIPE
L485M OR X70M	0.12f	0.45f	1.7f	0.025	0.015	g	g	g	h	0.43f	0.25

MECHANICAL REQUIREMENTS
Y.S	T.S	ELONGATION
Mpa(psi)	Mpa(psi)
min	min	min
485(70 300)	635(92 100)	f

IMPACT TEST
AVG. ABSORBED ENERGY	IND. ABSORBED ENERGY
Min.(joules)	Min.(joules)
27	20

	API 5L PSL-1 X52	API 5L PSL-2 X52
Tensile strength, min /max, psi (MPa)	66,700(460)/ n/a	66,700 / 110,200
Yield strength, min /max, psi (MPa)	52,000 (300)/n/a	52,000 / 76,900

For each reduction of 0.01% below the specified maximum concentration for carbon, an increase of 0.05% above the specified maximum concentration for manganese is permissible, up to a maximum of 1.65% for > grades B, but < X52; up to
maximum of 1.75% for grades >X52, but <x70; and="" up="" to="" a="" maximum="" of="" 2.00%="" for="" grade="" x70<="" li=""> </x70;>
The sum of the niobium, vanadium, and titanium concentrations shall be < 0.06%
Unless otherwise agreed, 0.50% maximum for copper, 0.30% maximum for nickel, 0.30% maximum for chromium, and 0.12% maximum for molybdenum.

Line pipe – types of steel

Chemical Analysis(%) For Part Standard

Standard	Class	Grade	C	Si	Mn	P	S	V	Nb	Ti
max	max	max	max	max	max	max	max
APL 5L
ISO 3181	PSL1	L245 or B	0.26	-	1.20	0.030	0.030	-	-	-
L290 or X42	0.26	-	1.30	0.030	0.030	-	-	-
L320 or X46	0.26	-	1.40	0.030	0.030	a,b	a,b	b
L360 or X52	0.26	-	1.40	0.030	0.030	b	b	b
L390 or X56	0.26	-	1.40	0.030	0.030	b	b	b
L415 or X60	0.26	-	1.40	0.030	0.030	c	c	c
L450 or X65	0.26	-	1.45	0.030	0.030	c	c	c
L485 or X70	0.26	-	1.65	0.030	0.030	c	c	c

Mechanical Properties

| Class | Grade | Yield Strength MPa | Yield Strength MPa | Y.S/T.S | | | | |---|---|---|---|---|---|---|---| | min | max | min | max | max | | | | | API 5L ISO3183 | PSL2 | L245R or BR L245N or BN L245Q or BQ L245M or BM | 245 | 450 | 415 | 655 | 0.93 | | L290R or X42R L290N or X42N L290Q or X42Q L290M or X42M | 290 | 495 | 415 | 655 | 0.93 | | | | L320N or X46N L320Q or X46Q L320M or X46M | 320 | 525 | 435 | 655 | 0.93 | | | | L360N or X52N L360Q or X52Q L360M or X52M | 360 | 530 | 460 | 760 | 0.93 | | | | L390N or X56N L390Q or X56Q L390M or X56M | 390 | 545 | 490 | 760 | 0.93 | | | | L415N or X60N L415Q or X60Q L415M or X60M | 415 | 565 | 520 | 760 | 0.93 | | | | L450Q or X65Q L450M or X65M | 450 | 600 | 535 | 760 | 0.93 | | | | L485Q or X70Q L485M or X70M | 485 | 635 | 570 | 760 | 0.93 | | | | L555Q or X80Q L555M or X80M | 555 | 705 | 625 | 825 | 0.93 | | | | L625M or X90M L625Q or X90Q | 625 | 775 | 695 | 915 | 0.95 | | | | L690M or X100M L690Q or X100Q | 690 | 840 | 760 | 990 | 0.97 | | |

Minimum Impact Energy

Specified Outside Diameter	Grade	Charp Imapct Test 0℃
Impact of Pipe Body	Impact of Weld
API 5L
ISO3183	D≤762mm	≤L485 or X70	27	27
L555 or X80	40	27
762mm< td="" style=“box-sizing: border-box;”><>	≤L555 or X80	40	27
1219mm< td="" style=“box-sizing: border-box;”><>	≤L415 or X60	40	27
>L415 or X60
≤L555 or X80	54	27
>1422mm	≤L415 or X60	40	40
>L415 or X60
≤L555 or X80	54	40

API 5L X52 PSL1 Pipe – delivery condition and surface

API 5L X52 PSL1 Pipe – straightness

Ends of the API 5L X52 PSL1 Pipe

Marking of API 5L X52 PSL1 Pipe and tube bundles

API 5L X52 PSL1 Pipe – surface protection

Complete information about API 5L x52 pipe steel given below:

High yield seamless Pipe API 5L grade X52 PSL 2

Grade X 52 Q PSL 2

The steel pipe mentioned herein is substantially modified from the API 5L, X52 standard.
Pipes are fully killed and fine-grain steel material
NACE MR0175:”Satisfactory”
This steel offers enhanced yield tensile ratio of 0.87 (max) and impact values verified from as low as -50°C
This grade is also known as L360Q in USC Units

Grade X 52 Surface

Grade X 52 NDT

Grade X 52 Hydrostatic test

Grade X 52 Certification and traceability

Grade X 52 Dimensional control

Grade X 52 Pipe end:

Grade X 52 Protection

Description API 5L X 52 PSL 2 / L360 N/Q

	C	Mn	Si	S	P	Cu	Ni	Cr	Mo	V	Nb	Ti	Sn	B	N	Al total
Heat	0,14	1,55	0,45	0,005	0,020	0,20	0,20	0,20	0,08	0,06	0,04	0,02	0,015	0,0005	0,009	0,055
Prod	0,16	1,60	0,50	0,005	0,022	0,20	0,20	0,20	0,08	0,06	0,04	0,02	0,020	0,0005	0,009	0,060

Wall thickness	Yield stress	Tensil strenght	Elongation
T MM	R N/MM2	R N/MM2	%
T <= 40	MIN. 360	490-620	22
40 70	MIN. 335

API 5L X 52 PSL 1