Trade Name	API 5L X60 PSL2 Pipe
Weld Alternatives:	ERW, HF, DSAW/SAWL, SMLS, HSAW
OD Size Range:	ERW: 0.375″ through 30″
HF: 0.840″ through 24″
DSAW/SAWL: 12.75″ through 144″

SMLS: 0.840″ through 26″ HSAW: 8.625″ through 144″ | | Wall Ranges: | ERW: 0.120″ through 1.000″ HF: 0.120″ through 1.000″ DSAW/SAWL: 0.250″ through 6.000″

SMLS: 0.250″ through 2.500″ HSAW: 0.250″ through 1.000″ | | Lengths: | Single Random Double Random Custom (up to 300′) | | Grade: | ASTM A53, ASTM A106, ASTM A179, ASTM A192, ST35.8, ST37, ST42, ST52, E235, E355, S235JRH, S275JR, S355JOH, P235TR1, 10#, 20#, 45#, Q235, Q345 | | Schedule: | SCH5 SCH10 SCH20 SCH30 SCH40 SCH80 SCH120 SCH140 SCH160 SCHXS SCHXXS | | Surface Finishes: | Bare, Oiled, Mill Varnish, Galv, FBE, FBE Dual, 3LPE, 3LPP, Coal Tar, Concrete Coating and Tape Wrap. | | End Finishes: | Beveled, Square Cut, Threaded & Coupled. | | Additional Services: | Internal Coating |

CHEMICAL COMPOSITION

Mass fraction, based upon heat and product analysis % maximum	CARBON EQUIVALENT a
% MAXIMUM
Cb	Si	Mnb	P	S	V	Nb	Ti	Other	CEIIW	CEPcm
SEAMLESS & WELDED PIPES
L320N or X52N	0.24	0.4	1.2	0.025	0.015	0.07	0.05	0.04	e	0.43	0.25
L320Q or X52Q	0.18	0.45	1.4	0.025	0.015	0.05	0.05	0.04	e	0.43	0.25
WELDED PIPE
L290M OR X52M	0.22	0.45	1.3	0.025	0.015	0.05	0.05	0.04	e	0.43	0.25

MECHANICAL REQUIREMENTS

Y.S	T.S	ELONGATION
Mpa(psi)	Mpa(psi)
min	min	min
415(60 200)	565(81 900)	f

IMPACT TEST

AVG. ABSORBED ENERGY	IND. ABSORBED ENERGY
Min.(joules)	Min.(joules)
27	20

API 5L X60	(PSL2)
Minimum Yield Strength:	60,200 psi
Maximum Yield Strength:	81,900 psi
Minimum Tensile Strength:	75,400 psi
Maximum Tensile Strength:	110,200 psi
Notes: This is a standard line pipe grade specified in API (American Petroleum Institute) specification 5L.

| API 5L X60 Industry Specifications | Chemical Composition | Yield Strength min. (KSI) | Tensile Strength min. (KSI) | Yield to Tensile Ratio (max) | Elongation % | |---|---|---|---|---|---| | ASTM A105, A106, A234, A333, A350, A420, A694,A860 | C 0.16 Si 0.45 Mn 1.65 P 0.020 S 0.010 V 0.08 Nb 0.05 Ti 0.04 | 60 | 75 | 0.93 | 19 |

API 5L X60

Production Standards & Material Qualities

| API 5L L245 / Gr. B (PSL 1) API 5L L290 / X42 (PSL 1) API 5L L245 / Gr. B (PSL 2) API 5L L290 / Gr. B (PSL 2) API 5L L320 / X46 (PSL 1) API 5L L320 / X46 (PSL 2) | API 5L L360 / X52 (PSL 1) API 5L L360 / X52 (PSL 2) API 5L L415 / X60 (PSL 1) API 5L L415 / X60 (PSL 2) API 5L L450 / X65 (PSL 1) API 5L L450 / X65 (PSL 2) | |---|---| | Line Pipe API 5L, PSL 1, PSL 2 CSA Z 245.1 EN ISO 3183 GOST 20295 | Gr A, X70-(N, M) Gr 241-Gr 359 L 245-L485 (N, M, NE, ME) K34-K60 |

API 5L X60 PSL2 Pipe features:

API 5L X60 PSL2 Pipe – delivery condition and surface

API 5L X60 PSL2 Pipe – straightness

Ends of the API 5L X60 PSL2 Pipe

Marking of API 5L X60 PSL2 Pipe and tube bundles

API 5L X60 PSL2 Pipe – surface protection

CHEMICAL COMPOSITION
Mass fraction, based upon heat and product analysis % maximum	CARBON EQUIVALENT a
% MAXIMUM
Cb	Si	Mnb	P	S	V	Nb	Ti	Other	CEIIW	CEPcm
SEAMLESS & WELDED PIPES
L485Q or X70Q	0.18f	0.45f	1.8f	0.025	0.015	g	g	g	h	0.43	0.25
WELDED PIPE
L485M OR X70M	0.12f	0.45f	1.7f	0.025	0.015	g	g	g	h	0.43f	0.25

MECHANICAL REQUIREMENTS
Y.S	T.S	ELONGATION
Mpa(psi)	Mpa(psi)
min	min	min
485(70 300)	635(92 100)	f

IMPACT TEST
AVG. ABSORBED ENERGY	IND. ABSORBED ENERGY
Min.(joules)	Min.(joules)
27	20

API 5L X60 PSL 2